PORT Technology Personal Transit Management

Schindler PORT - Personal Transit Management

The Schindler PORT Technology revolutionizes the science of optimizing traffic flow through a building while offering personalized service and access control.

How does it work?

Perfection is quite a challenge in a modern facility where each trip may involve taking one or more means of vertical transport, obtaining access to secure areas, navigating to unfamiliar offices and so on – all the while just wanting to be at your destination and get on with the job at hand.

With The PORT Technology by Schindler, the Personal Transit Management system, the travelers’ only requirement is to simply communicate their identity and required destination at a PORT Terminal. The PORT Technology takes care of the rest by planning and executing a seamless journey using an optimal route designed to take the shortest possible time to complete.

A PORT terminal

Benefits at a glance

Performance

Especially suited to large elevator groups or straight-line configurations in heavy-traffic commercial buildings, PORT can increase handling capacity and reduce travel times – each by up to 35%.

Freedom & Flexibility

With Schindler's PORT Technology, you have the potential to remove many of the existing constraints on interior layouts, thereby allowing you greater freedom when designing the next generation of buildings.

Comfort

PORT reduces crowding both in the lobby and inside the car, by allocating passengers to individual floors. PORT offers fully integrated building access, and myPORT – elevator control and security building access from your smartphone.

Touchless operation

The PORT Technology offers different ways to travel through buildings without ever touching an elevator or even a door.

Save energy

The PORT Technology ECO monitors the traffic conditions continuously and keeps average waiting times below or at the specified level, while saving the maximum of energy possible.


Features

Among the standard features included in The PORT Technology and a number of advanced options to further tailor the system to your needs.

The PORT barrier

The PORT barrier

PORT Technology was designed to bring a new dimension to the use of barriers in the building entry process. With PORT, not only can each entrant be verified as valid but an elevator for their preferred destination floor can be ordered and its identity communicated, right at the barrier. And, because this is a PORT control, we can guarantee that the elevator will provide the best possible journey in the prevailing traffic conditions.

RFID entry

Each PORT is equipped with a reader which can communicate with any compatible Radio Frequency device ranging from a simple card to a smart phone. This can be used to provide special features during normal elevator operation or, when the PORT is incorporated into a barrier, to provide an access control system which is fully integrated with the elevators.

Predictive parking

Parking can be configured such that the system uses real-time statistical data to determine the most likely demand floors during the current time period and parks the elevators accordingly. Alternatively the customer can pre-define parking floors.

Anti-passback

When the PORT is used in conjunction with a barrier, this feature prevents a user passing their card back across the barrier to facilitate entry of another person by invalidating the second transaction at this barrier or any others nearby.

Forward credentialing

This optional feature is to discourage passengers from entering into a cabin, for example with a colleague, without using their badge. If a passenger boards an elevator without using their badge, a sanction is applied when this badge is used again. This may range from a warning message on the PORT screen to a requirement to reset the badge at the security desk in the lobby.

Advanced features - Tailor the system to your needs

Double-deck

In many tall buildings it is desirable to maximize elevator hoistway usage by deploying double-deck elevators. With conventional systems these can prove very frustrating for the user as, for example, a lower-deck cabin stops repeatedly because of a service requirement at the upper-deck or there is confusion as to what cab must be entered at a lobby. With The PORT Technology this issue is virtually removed. Since we know all the passengers and their destinations in advance the double-deck elevators do not stop more often than single deck elevators. In addition the advanced signalization provided by the PORT screen eliminates any passenger confusion.


Shuttle Control

A shuttle service between 2 floors can appear to be the simplest of elevator operations. In fact if it is not optimized there is potential to transport far fewer people that theoretical capacity and cause long waiting times. The PORT Technology Shuttle control uses passenger volume assessment tools to set up an advanced service pattern that at all times maximizes the flow through the system while minimizing wait times.


Crowd Prevention

In a sky lobby environment where passengers are being delivered to the area by elevators from the main lobby and then re-boarded into elevators to higher floors there is always a concern that overcrowding may occur. By comparing the number of people delivered to the sky lobby with the number leaving the system can detect this possibility and retard the delivery volume until space has been created.


Emergency Evacuation

Since The PORT Technology knows who has been delivered to each floor it can build up a picture of the population distribution at each floor. In the event of the need to evacuate the system can decide which floors can be evacuated via the stairwells without overcrowding and advise those occupants to take them using its screen. At other floors it can offer an elevator evacuation and, since it knows the population, can bring enough elevators to take everyone on a specific floor at once thus avoiding panic.


Peak Performance Booster

In normal circumstances the elevator configuration is designed to provide excellent service to its occupants. There may be times, however, due to an unusual influx of visitors or large-scale loss of elevator cabs (for example due to construction) when this is no longer the case. Using the advance communications capability of The PORT Technology passengers can be instructed to either walk down 1 flight of stairs to pick up their elevator or be delivered 1 flight above their destination. This would be undertaken to combine required stops and therefore, by making elevators more rapidly available, to significantly increase the handling capacity of the units.


Energy Control Option (ECO mode)

During low traffic periods, a typical elevator system, in an attempt to minimize waiting times, will assign individuals their own cab. Since an elevator is counterbalanced at half load, this results in many trips with highly unbalanced loads and consequently high energy consumption. In ECO mode “low traffic” trips are planned to allow for reasonable rather than minimal waiting times. This means that all elevators are not needed thereby providing significant energy savings which are increased by biasing the number of passengers per car to be as close to the balanced load as possible.


Reporting

For customers who have the need of detailed information relating to the operation of their system a comprehensive reporting package is available.

Transit Management

Best-in-class traffic management

PORT Transit Management represents a major expansion of system capability from the baseline PORT. From initial building entry through onward travel and finally exit a truly integrated solution, enabling secure and convenient travel is available. It includes a range of terminals, with specialized applications for visitors, parking, doors, offices and residences.

PORT Elevator

All Schindler elevators are fully enabled for PORT Technology, with all the advantages of reduced travel time in elevators, higher passenger traffic capacity, and the potential for full building security and personalized access.

PORT Access

PORT Access is an access control solution for commercial and residential buildings, providing truly integrated mobility. Tenants and visitors travel securely and conveniently from entrance to destination through a network of PORT Access terminals.

myPORT

With myPORT, seamless travel throughout the building is quick, secure, and convenient – simply use your mobile phone to unlock doors and call elevators.


Touchless Operation

The PORT Technology now offers four different ways to travel through buildings without ever touching an elevator or even a door. The world’s leading destination control and security access system for elevators and buildings now makes it possible for all tenants, visitors and the general public to navigate their way through Schindler PORT and myPORT-equipped buildings safely, securely, and touching only your phone or personal access card.


PORT Innovation Lab

The PORT Innovation lab is designed to be a futuristic world for our visitors and customers by creating a unique environment with latest technologies and innovations. During a 90 minutes journey, visitors experience The PORT Technology through an impressive multimedia show, interactive myPORT simulations and an overhead-dome movie, allowing the visitors to be shifted into the future of urban development.

Your country specific configuration

Schindler products are available in more than 100 countries and they meet specific local requirements. Please refer to your country website.